How To

How to Fix ‘No Sound’ During a Call on iPhone: Top Solutions you Should

We have received so many complaints on our portal regarding the sound issues, occurring on the iPhone. It is quite frustrating for the persons from both the ends of the call to strike a conversation amidst such terrible sound issues. So, it was the high time that we come to your rescue and help you fix such issues. Here we bring you a host of such hacks, which will help you fix a length of sound issues that you might be facing with your iPhone device.  

How to Fix ‘No Sound’ during a call on iPhone

There are multiple reasons behind such sound issues, faulty hardware being one of them. A bug in the system is another such issue that might create sound conflict on your iPhone. If you have installed any third-party apps on your iPhone, then it could be another such reason for producing ‘No Sound’ during the phone calls. 

no sound in iphone

List of Possible Solutions

Apparently, we have observed that most of the iPhone 8, 8 Plus, and X, users have been facing such sound issues during the call. Even though they have checked the software and hardware, they are still unable to detect the actual issue and so obviously, they fail to overcome the respective sound issue as well. In this article, we have covered 10 solutions that might help you get back the sound on your iPhone. Have a read to detect yours and fix it! 

  1. Restart Your iPhone

Restarting the device is the universal way of fixing the minor issues on your iPhone. You can always opt for a ‘Soft Reset’ in order to resolve the nominal software issues. Try restarting your iPhone and check whether your issue is fixed or not. Congratulations, if your issue gets fixed. If not, move on to the next suggested-solution on the list. 

  1. Adjust the Volume Level & Audio Setting

Make sure that the iPhone’s volume is not set to its lowest point. Additionally, you need to check the ringer too; it should not be muted. These are some of the basic factors that generate low sound during phone calls. In order to adjust the volume settings, you need to follow the below steps:

  • Step 1: Go to Settings 
  • Step2: Click on Sounds
  • Step 3: Select Ringer & Alerts and Adjust the Volume Level
  1. Disconnect Headphones

It is possible that your iPhone is on the Headphone mode because of which you are facing the issue of iPhone sound not working during calls. Try unplugging the respective headphone from your iPhone. If the connection is stuck, despite of unplugging the headphone then you can try and restart the phone to get away with the connection issue. Also, try cleaning the earphone jack to expel any residue or particles in it and afterward check if the ‘No Solid’ issue is fixed in your iPhone 8/8 or more/X.

  1. Toggle Off ‘Do Not Disturb’

You need to make sure that the ‘Do Not Disturb’ mode of your iPhone is disabled. If you find the ‘Do Not Disturb’ option ON, then go to the settings and turn it off. Thereafter, check whether the ‘No Sound’ issue is fixed or not.

  1. Switch Off Bluetooth

If you have a habit of wearing any Bluetooth accessories while using your phone, then you need to make sure that whenever you are not using the Bluetooth device, you need to disconnect it from the iPhone. Make sure that your iPhone is not connected with Bluetooth devices whenever you are using the iPhone as your primary device to take calls. To turn off the Bluetooth, go to Settings and toggle off the. Bluetooth option.

  1. Update iOS

As mentioned earlier, if the hardware part is in good condition, you must check the software side. More often than not, the system bug creates the ‘No Sound’ issue on the iPhone. For this, you need to make sure that your device is running on the latest iOS version. To install the latest update, follow the steps mentioned below:

  • Step 1: Go to Settings
  • Step2: Tap on General
  • Step 3: Select Software Update > Click on Download & Install (only accessible when any update available to be installed)
  1. Reset All Settings on iPhone

Apart from the ‘Restart the iPhone’ option, resetting all the iPhone audio settings remains as the go-to option for fixing any kind of possible software issues. Here’s sharing a few steps that will help you in reset the settings on your iPhone 8/8 Plus/X:

  • Step 1: Go to Settings
  • Step2: Tap on General
  • Step 3: Click on the ‘Reset’ Option
  • Step4: Select ‘Reset All’ Settings under the ‘Reset’ menu (Your Apple Passcode is required here in order to initiate the ‘Reboot’ process.)
  1. Factory Reset

Factory Reset is a sure-shot way of fix the ‘No Sound’ issue during phone calls. However, under this process you tend to lose all your data, including messages, contacts, chat, media files, et al. Therefore, whenever you decide to opt for ‘Factory Reset’, it is advisable to first take a backup of your data. 

Just in case, if you missed taking a backup of your data prior to before, iPhone ‘Data Recovery’ tool can come to your rescue for retrieving your lost data from iCloud/iTunes.

  1. Remove the Third-party App

More often than not, any third-party app may diminish the performance of your iPhone. If you have installed any third-party app for call-blocking or filtering apps, you can try uninstalling those apps and check whether your iPhone’s ‘No Sound’ issue is fixed or not.

  1. Contact Apple Service Centre

If none of the above-mentioned options works to resolve the ‘No Sound’  issue of your iPhone – you can eventually contact the Apple Service Centre for professional help. They’ll surely help you resolve the issue; and if not then they might also give you a replacement for your device. 

The Concluding Words!

We hope this article must have helped you in resolving the ‘No Sound’ issue you faced during a phone call on the iPhone. If you still have any queries regarding this or any other such topic around Apple and Android accessories, feel free to write to us about it. 

Read More:

Extract Zip Files on iPhone, iPad Unzip Apps for iOS
Best ways to Install GBA4iOS in iOS 12 on iPhone to Play vintage Games?
How to Get Apple News App Outside U.S.
How to install Windows 10 on your Mac using Bootcamp

Related posts
How ToiPhone

How to Hide Photos on Your iPhone and iPad?

How ToiPhoneMacbook

How to take Screenshots and Record Screen in macOS Mojave "With Steps"

Sign up for our Newsletter and
stay informed

Leave a Reply

Your email address will not be published. Required fields are marked *